315KVA Dry-type Transformer

315KVA Dry-type Transformer
Details:
The 315kVA dry-type transformer is a widely used three-phase distribution transformer. Main models are SCB13, SCB14 and SCB18. Its standard rated voltage is 10kV/0.4kV, stepping down 10kV high voltage to 0.4kV low voltage for 50Hz three-phase power supply. It is widely adopted in commercial...
Send Inquiry
Description
Send Inquiry

The 315kVA dry-type transformer is a widely used three-phase distribution transformer. Main models are SCB13, SCB14 and SCB18. Its standard rated voltage is 10kV/0.4kV, stepping down 10kV high voltage to 0.4kV low voltage for 50Hz three-phase power supply. It is widely adopted in commercial complexes, office buildings, hospitals, data centers, basement power rooms and indoor factory power distribution, where strict fire safety standards are required. Cooled directly by ambient air, this transformer contains no insulating oil with no risk of oil leakage and offers excellent fire resistance. The core is laminated with cold-rolled oriented silicon steel sheets to reduce no-load loss. Windings are encapsulated with vacuum-cast epoxy resin for stable insulation. Copper windings are standard, while aluminum windings are optional upon request. It adopts double-winding structure with Dyn11 as the preferred connection group. The high voltage side is fitted with an off-circuit tap changer with regulation range of ±5% or ±2×2.5%, and the insulation class is Class F. Taking SCB14-315/10 as an example, the rated high voltage current is 18.2A, rated low voltage current 454.7A, short-circuit impedance 4%. The total weight of unit with copper windings is approximately 1400~1600kg, and the rated load capacity is about 252kW. Dry-type transformers are flame-retardant, pollution-free, easy to install and maintain with low operating noise. Nevertheless, its purchase cost is higher than oil-immersed transformers. Heat dissipation performance depends heavily on ambient ventilation. It is not suitable for long-term heavy-load operation or unprotected outdoor installation. During daily maintenance, dust on winding surfaces shall be cleaned regularly and tightness of terminals should be inspected.

Hot Tags: 315kva dry-type transformer, China 315kva dry-type transformer manufacturers, suppliers, factory, 10kV dry type transformer, delta star dry type transformer, dry resin transformer, dry type distribution transformer, dry type transformer winding, vpi transformer

10KV 30KVA--2500KVA

 

Send Inquiry
Send Inquiry