-
Single Phase Pole Mounted TransformerSingle phase pole mounted transformers are very suitable for installation on a single power pole due to their small size and light weight. Mainly used in low-voltage distribution network scenarios
-
250KVA Oil-immersed TransformerThe 250kVA oil-immersed transformer is a widely used three-phase power distribution equipment. Main models include S11-M, S20 and S22-M. Its standard rated voltage is 10kV/0.4kV, stepping down 10kV
-
220KVA Oil-immersed TransformerThe 220kVA oil-immersed transformer is a power transformer filled with insulating oil, designed to convert voltage for power distribution systems. It uses copper windings as the conductive medium.
-
200KVA Oil-immersed TransformerThe 200kVA oil‑immersed transformer is a distribution‑type power transformer with rated capacity of 200 kVA. It is widely applied in 10 kV power distribution systems for residential communities,
-
160KVA Oil-immersed TransformerS13‑M‑160KVA 10/0.4kV three‑phase hermetically‑sealed oil‑immersed distribution transformer adopts oxygen‑free copper winding and high‑permeability CRGO silicon‑steel core. It applies ONAN oil
-
125KVA Oil-immersed Transformer125KVA oil‑immersed distribution transformer, rated capacity 125kVA, standard voltage 10‑0.4kV, connection group Dyn11 with copper windings and fully‑sealed construction. Its core is made of
-
80KVA Oil-immersed TransformerS13‑M‑80kVA oil‑immersed distribution transformer,10/0.4kV, full‑copper winding, corrugated fully‑sealed oil tank, 4% impedance. Total weight 485kg, mounting gauge 400×400mm. Low loss & low noise,
-
63KVA Oil-immersed Transformer63kVA fully‑sealed oil‑immersed distribution transformer, rated 10kV/0.4kV, vector group Dyn11. It adopts oxygen‑free copper winding and high‑permeability silicon‑steel core, with corrugated
-
110KVA Oil-immersed TransformerThis 110 kVA S13‑M sealed oil‑immersed distribution transformer is widely used for rural power grids, small factories and distributed PV stations. It adopts full‑copper windings and high‑grade
-
30KVA 10KV Oil-immersed TransformerThe 30KVA 10KV three‑phase oil‑immersed transformer is a compact distribution power unit. It uses insulating oil for cooling and insulation. Featuring low power loss and robust structure with
-
10kVA 15kVA 25kVA Pole Mounted TransformerA pole-mounted transformer is an oil-immersed distribution transformer typically installed on utility poles. It primarily converts high voltage electricity (10kV and above) into low voltage
-
100kVA 125kVA 150kVA Pole Mounted Transformer100kVA, 125kVA, and 150kVA are the larger capacity levels of column mounted transformers, mainly used in areas with higher power supply density.
WebSingle-Phase Rural CSP Overhead Transformer Single-Phase Overhead Step-Up/Step-Down Single-Phase Overhead Autotransformer Single-Phase Overhead Smart Transformer If you don't see what you're...
WebSingle-Phase Overhead Conventional. Howard Industries manufactures a complete line of single-phase conventional overhead distribution transformers, all designed with...
WebSingle Phase Pole-Mounted Transformerers Prolec GE designs and manufactures a complete line of single-phase pole-type distribution transformers for installation on utility overhead systems. These...
WebPEAK single-phase overhead transformer. Eaton’s Cooper Power series single-phase overhead PEAK transformers provide the capability to manage increased loads and...
WebOverhead Single-Phase Transformer Installation . 1. Scope . This standard covers the information necessary to install overhead single-phase transformers on the 26 kV...
WebDaelim Belefic Single Phase Overhead Transformer is designed and produced normally for stepping utility distribution voltages (ranging from 2400 to 34500 volts) down to lower...
