enLanguage

Design concept of power transformer

Apr 08, 2026

Leave a message

(1) Due to the low saturation magnetic flux density of amorphous alloy materials, the rated magnetic flux density should not be too high during product design. A flux density of 1.3–1.35T is generally sufficient to achieve good no-load loss values.

 

(2) The thickness of a single amorphous alloy sheet is only 0.03mm, so its lamination factor can only reach 82%–86%.

 

(3) To enable users to obtain maintenance-free or low-maintenance benefits, amorphous alloy distribution transformers are now designed with a fully sealed structure.

Popular Products
2000KVA Dry Type Transformer
2000KVA Dry Type Transformer
In modern large-scale industrial and commercial power distribution systems, the 2000KVA dry type transformer represents
1600KVA 35KV Dry Type Transformer
1600KVA 35KV Dry Type Transformer
When talking about dry type transformers, most people are familiar with 10kV distribution models. However, the 35kV
1250KVA Dry Type Transformer
1250KVA Dry Type Transformer
In modern urban power distribution projects, dry type transformers are widely adopted for indoor power supply
1000KVA Dry Type Transformer
1000KVA Dry Type Transformer
The 1000KVA dry type transformer is a large-capacity indoor distribution unit, widely used in heavy-duty industrial
800KVA Dry Type Transformer
800KVA Dry Type Transformer
The 800KVA dry type transformer is a high-capacity indoor distribution device widely adopted in large industrial parks,
630KVA Dry Type Transformer
630KVA Dry Type Transformer
The 630KVA dry type transformer is a mainstream medium-to-large capacity distribution transformer widely deployed in
Send Inquiry
Send Inquiry